Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 85)

Descriptions of System Data Fields

THE BLANK PROG

RAMMING FORM SHOULD BE USED TO RECORD THE DATA FOR THIS INSTALLATION

Defaults (where applicable) Are Indicated In Text

The

following is a listing of all data fields in this control(presentedin numerical order). If

you have performed the pro

gramming inshuctiona that were includedwith the instd.lation of

each of the various peripheral devicescoveredin previous sections,this table will simply

serve as a referencefor all data fields in the system. If you have decidedto program all the

data fields in the system at one time (and therefore did not perform the programming

indicated previously in each section),you can use this listing to program all the data fields

*20

*21

*22

*23

*2.4

*25

INSTALLER CODE

The

Installer codeis used to enter the 4-cligitMaster security code

for each partition in the normal operation mode, via the keypad

connected to Partition 1. See “Master Code” in the

SYSTEM

OPERATION

sectionfor procedure.

Enter 4 digits, O-9. Default is 41-1-2.

QUICK ARM ENABLE

PartitionI

❑ psrtition2 ❑

If enabled, the [#] key can be used instead of the securitycodewhen

~ the system.

Enter Ofor disabledor 1 for enabledfor eachpartition.Default is O.

RF SYSTEM

This option is enabled(1) if a wirelessreceiveris used.

Enter 1 if 5881/5882 RF receiveris beingused; enter Oif no receiver

is being used. Default is O(none).

FORCED BYPASS FUNC1’iON Partition1

❑ Partition2 ❑

This f-ture allowsall faulted zonesto be bypassedautomatically.

All zones that are bypassedby this function will be displayed after

the bypass is initiated. Enter, for eachpartition:

O= No forcedbypass.This is the dethlt.

1 = Allows automaticbypassof all openzones.

Enter WS for UL installations.

RF’ HOUSE Ill CODE

The House ID identifiesreceiversand wirelesskeypads.

If a 5827 or 5827BD Wireless keypad is to be used, a House ID code

MUST be entered (01-31), and the keypad should be setto the same

ID. If no wirelesskeypad is to be usd enter 00.

Partition 2 House ID = entered Partition 1 ID + 1 (use 01-30 for

partition 1 if wirelesskeypadsare usedin both partitions).

WIRED ZONE EXPANSION

❑

Use this field to select the type of expansion unit being used, as

follows

O= none; 1 = 4219; 2 = 4229; 3 = 4204. Default is O.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 119 120

Comentarios a estos manuales

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 85

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vista Ademco -10SE