Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 84)

Type06

24hour Silent Alarm

‘Ijpe 07

24hour Audible Alarm

&pe 08

24-hour

Auxiliary Alarm

Type 09

Supervised Fire

(With Verification on

Zone 1)

‘&pe 10

Interior w/Delay

‘&pe 20

Arm-stay

‘&pe 21

Arm-Away

‘&pe 22

Disarm

Type 23

No Alarm

Response

Type24

Silent Burglary

This zone type sends a report to the Central Station but provides no keypad

display or sounding. This zone @e is usually assignedto a zone containing

an Emergency button.

This zone type sends a report to the Central Station, and provides an alarm

sound at the keypad, and an audible ezternal alarm. This zonetype is usually

assigned to a zonethat has an Emergencybutton.

This zone type sendsa report to Central Station and providesan alarm sound

at the keypad. (No bell output is provided). This zone type is usually

assignedto a zonecontaining a button for use in personalemergencies,or to a

zone containingmonitoring devicessuchas water or temperature sensors,etc.

This zone type provides a fire alarm on short circuit and a trouble condition

on open circuit. The bell output will pulse when this zone type is alarmed.

This zone type is always active and cannotbe bypassed.This zone @pe can

be assigned to a control panel basic wired zone, any zone in a wired

zone expansion module, or wireless zones. When used with zone 1 on

the panel, 2-wire smoke detectors can be used. For an explanation of the

“verification” function, refer to the “Operation” paragraph in a previous

sectiontitled 2-Wire Smoke Detector Installation.

Alote:

Only hardwired zone 1 can be programmed as a firs zone in UL

in@aUations. However, any wireless wne can be used as a fire

zonQ.

This

zone type gives entry delay #1 (using the programmed en~ time), if

tripped when the panel is armed in the Away mode. Entry delay begins

whenever sensorsin this zone are violate~ regardless of whether or not an

entrylexit delay zone was tripped tist. No

entry &lay is provided if tripped

when the panel is armed in the Maximum mode.Exit delay is presentfor any

arming mode. This

zone type is b~assed when the panel is armed in

the Stay or Instant modes.

This is

a special-purposezone type usedwith 5800 serieswirelesspushbutton

units which will result in arming the system in the STAY mode when the

zone is activated. Pushbutton units send zone number as a user number to

central stationwhen

arming or disarming.

Th& is a special-purposezone @pe used with 5800 serieswirelesspushbutton

units which will result in

arming the system in the AWAY mode when the

zone is activated.Pushbutton units send zone number as a user number to

central stationwhen

arming or disarming.

This is a special-purposezone type usedwith 5800 serieswirelesspushbutton

which will result in disarmin

g the systemwhen the zone is activated.

This zone type can be used on a zone when an output relay actionis desired,

but with no accompanyingalarm (e.g.,lobby door access).

This zone type provides an instant alarm, with NO audible indication at any

keypad or external sounder, if the zone is faulted when the system is armed

in the AWAY, STAY, INSTANT, or MAXIMUM modes. This zone type is

usually assigned to all sensors or contactson exterior doors and windows

where audible notification is NOT desired. A report is sent

to the Central

Station.

NOTE:

All of the zone types described are available for the wireless portion of the system, if used.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 119 120

Comentarios a estos manuales

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 84

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vista Ademco -10SE