Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 58)

General Information

Ckeck availability of ModeZs 7720 PLUS or 7820 long range radios.

If output to long range radio is selected,alI messagesthat are programmed to

go to the primary telephone line receiverwill also be sent to the 7720 PLUS

or 7820 long range radio. These messageswill be in Contact ID format (not

affectedby entry in field *48).

The data line is supervised, as well as certain functions in the radio. If

communication is lost or a trouble develops,a messagewill be attempted to

be sent via both radio and telephoneto the central station.

For completeinformation, seethe manual that accompaniesthe radio.

Connect the data in/data out terminals and voltage input terminals of the

No. 7720 PLUS or 7820 Long Range Radioto the control’skeypad connection

points, terminals

4, 5,6, and-7 as *own below.

BIACK

RED

3 ‘“ “--’” 1

LO”NGRANGE RADI

v GRFFN !

7720PLUWS20

6=-4

CONTROL

1 1

TERMINALS

Pigure

18. Long Range Radio ComMxtl “Om

With at least one 2-line Alpha keypad(5137AD or 6139) connectedto the

Partition 1 keypad terminals on the control, power up the system

temporarily. If you had previously connectedthe AC transformer to the

controlpanel, you need only plug in the transformer (to 120VAC outlet) to

power up the system.

Enter the programming mode by keying the following on the Alpha

keypad Installer code (41 12) + 80 0.

Press *29 OUTPUT TO LONG RANGE RADIO

❑

Enter the first digit of the trouble dialer report. The 2nd digit of the code

enteredinfield *O is automaticallysentas the seconddigit of this code.

Program the 7720PLUS or 7820radio for deviceaddress3.

Exit the programming modeby keying=.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 119 120

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 58