Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 86)

100

–86–

TROUBLESHOOTING GUIDE (continued)

CONTROL

SYMPTOM POSSIBLE CAUSE REMEDY

1. "AC POWER" light off. 1a. Interrupted AC power supply. 1a. Check transformer connection and

Powerline circuit breaker.

2. Digital communicator message

not being received.

2a. VISTA-20SE in TEST mode.

2b. Telephone connection not secure.

2c. Digital communicator malfunctioning.

2d. Telephone number in program needs prefix

or access code.

2e. Telephone call to central monitoring station

requires operator assistance.

2a. Remove from TEST mode.

2b. Check all connections.

2c. Check with a different VISTA-20SE.

2d. Program prefix or access code into the

VISTA-20SE.

2e. VISTA-20SE system cannot work in this

situation.

3. Does not arm properly. 3a. Ready light not on. 3a. Check for faulted zones and make intact, or

use Bypass arming, if desired.

4. VISTA-20SE doesn't respond

to keystrokes on keypad.

4a. "CC" or "MODEM COMM" displayed.

4b. "d1" or "System Busy" displayed.

4c. "E4" or "E8" displayed.

4d. Keypad address setting incorrect.

4a. System is in communication with

downloader at central station. Wait until

download session is finished.

4b. System has just been powered and is in its

one minute initialization. To bypass this

time, press '#' + '0'.

4c. More zones have been programmed than

the zone expansion modules can handle.

Delete some zones or use a higher

capability RF receiver.

4d. Keypads must be set for address 31 (non-

addressable mode).

SMOKE DETECTOR

SYMPTOM POSSIBLE CAUSE REMEDY

1. Detector alarms, no apparent

reason.

1a. Dust, dirt in sensing chamber.

1b. Improper location.

1c. Unit malfunctioning.

1a. Clean unit's sensing chamber with vacuum

cleaner per unit's instructions.

1b. See unit's instructions for locations to

avoid. Relocate as necessary.

1c. Replace detector.

2. Detector's siren sounds. 2a. Unit not receiving required power.

2b. Unit malfunctioning.

2a. Check for proper installation of battery. Try

new battery.

2b. Replace detector.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 99 100

Comentarios a estos manuales

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 86

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vista Ademco -10SE