Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 54)

100

–54–

67 RF XMTR LOW BATTERY REPORT CODE 0 | 0

This is sent in the event that a wireless transmitter low battery condition

exists. (See box)

68 CANCEL REPORT CODE (See box on previous page.) 0 | 0

This is sent upon disarming of the system after an alarm condition was

reported.

RESTORE

REPORT CODES

(*70–*76)

*70 ALARM RESTORE REPORT CODE, 1st DIGIT 0

This is sent when the zone that caused an alarm is restored to its non-

faulted condition. 2nd digit is automatically sent as the 2nd digit of the

zone alarm report code programmed in field *56, if expanded or 4+2

reporting is selected.

71 TROUBLE RESTORE REPORT CODE 0 | 0

See box. This is sent when a trouble in a zone is restored.

72 BYPASS RESTORE REPORT CODE 0 | 0

See box. This is sent when a zone that has been bypassed is un-

bypassed.

73 AC RESTORE REPORT CODE 0 | 0

This is sent when AC power has been restored after an AC power

outage. See box. Reports with Partition 1 Subscriber No.

74 LOW BAT RESTORE REPORT CODE 0 | 0

This is sent when a system low battery condition is restored to normal.

See box on previous page. Reports with Partition 1 Subscriber No.

75 RF XMTR LOW BATTERY RESTORE CODE 0 | 0

See box. This is sent when a transmitter that previously sent in a low

battery message has sent a message indicating it no longer has a low

battery condition.

76 TEST RESTORE REPORT CODE 0 | 0

This is sent when the test mode is exited. See box. Reports with

Partition 1 Subscriber No. A restore code entered

here will cause a restore message to be sent when Test mode is exited.

89 EVENT LOG 80% FULL REPORT CODE 0 | 0

If an Event Logging selection is made in field

90, a message can be sent

to the central station receiver when the log is 80% full. If the log becomes

full, a new message will overwrite the oldest message in the log.

Note:

Aside from the selection made by the installer in field

90, all control and

readout from the log is accomplished via the Downloader.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 99 100

Comentarios a estos manuales

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 54

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vista Ademco -10SE