Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 46)

100

–46–

Type 06

24-hour Silent Alarm

This zone type sends a report to the Central Station but provides no keypad

display or sounding. This zone type is usually assigned to a zone containing an

Emergency button.

Type 07

24-hour Audible Alarm

This zone type sends a report to the Central Station, and provides an alarm

sound at the keypad, and an audible external alarm. This zone type is usually

assigned to a zone that has an Emergency button.

Type 08

24-hour

Auxiliary Alarm

This zone type sends a report to Central Station and provides an alarm sound at

the keypad. (No bell output is provided). This zone type is usually assigned to a

zone containing a button for use in personal emergencies, or to a zone containing

monitoring devices such as water or temperature sensors, etc.

Type 09

Supervised Fire

(With Verification on Zone

This zone type provides a fire alarm on short circuit and a trouble condition on

open circuit. The bell output will pulse when this zone type is alarmed. This zone

type is always active and cannot be bypassed. This zone type can be assigned

to a control panel basic wired zone, any zone in a wired zone expansion

module, or wireless zones. When used with zone 1 on the panel, 2-wire smoke

detectors can be used. For an explanation of the “verification” function, refer to

the “Operation” paragraph in a previous section titled 2-Wire Smoke Detector

Installation.

Note: Only hardwired zone 1 can be programmed as a fire zone in UL

installations. However, any wireless zone can be used as a fire

zone.

Type 10

Interior w/Delay

This zone type gives entry delay #1 (using the programmed entry time), if tripped

when the panel is armed in the Away mode. Entry delay begins whenever

sensors in this zone are violated, regardless of whether or not an entry/exit delay

zone was tripped first.

No entry delay

is provided if tripped when the panel is

armed in the Maximum mode.

Exit

delay is present for

any

arming mode. This

zone type is bypassed when the panel is armed in the Stay or Instant

modes.

Type 20

Arm–Stay

This is a special-purpose zone type used with 5800 series wireless pushbutton

units which will result in arming the system in the STAY mode when the zone is

activated. Pushbutton units send zone number as a user number to central

station when arming or disarming.

Type 21

Arm–Away

This is a special-purpose zone type used with 5800 series wireless pushbutton

units which will result in arming the system in the AWAY mode when the zone is

activated. Pushbutton units send zone number as a user number to central

station when arming or disarming.

Type 22

Disarm

This is a special-purpose zone type used with 5800 series wireless pushbutton

which will result in disarming the system when the zone is activated.

Type 23

No Alarm Response

This zone type can be used on a zone when an output relay action is desired, but

with no accompanying alarm (e.g., lobby door access).

Type 24

Silent Burglary

This zone type provides an instant alarm, with NO audible indication at any

keypad or external sounder, if the zone is faulted when the system is armed in

the AWAY, STAY, INSTANT, or MAXIMUM modes. This zone type is usually

assigned to all sensors or contacts on exterior doors and windows where bells

and/or sirens are NOT desired. A report is sent to the Central Station.

NOTE: All of the zone types described are available for the wireless portion of the system, if used.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Comentarios a estos manuales

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 46

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vista Ademco -10SE