Vista Ademco -10SE Guía para resolver problemas descargar pdf (Pagina 50)

100

–50–

DIALER PROGRAMMING

(

40–

50)

Enter up to 6 digits if PABX is needed to access an outside line. If fewer

than 6 digits are needed to be entered, exit by pressing [

] and next field

number (e.g., 41). To clear entries from field, press

Fields

40,

41,

42:

Enter up to the number of

digits shown. Do not fill

unused spaces.

Enter 0–9,

# + 11 for ‘

’

# + 12 for ‘#’

# + 13 for a pause

(2 seconds)

41 PRIMARY PHONE No. (See Box at Left)

| | | | | | | | | | | | | | |

Enter up to 16 digits. If fewer than 16 digits entered, exit by pressing [

]

and next field number (e.g., 42). To clear entries from field, press

Note: Back-up reporting (8 calls are made to the secondary phone

number if no kiss-off is received after 8 attempts to the primary number)

is automatic only if there is a secondary phone number (field

42).

42 SECONDARY PHONE No. (See Box at Left)

| | | | | | | | | | | | | | |

Enter up to 16 digits. If fewer than 16 digits entered, exit by pressing [

]

and next field number (e.g., 43). To clear entries from field, press

See back-up reporting note for field *41. If using the pager feature, enter

the pager phone number here.

For Fields

43,

44,

45, and

46:

Enter digits 0–9; # +11=B; #

+12=C; # +13=D; # +14=E; or #

+15=F.

Enter [

]

as the fourth digit if a

3-digit account number (for 3+1

dialer reporting format) is used.

Enter 0 as the first digit of a 4-

digit account number for Nos.

0000–0999. Exit field by

pressing [

]

(and press next

field number) if only 3 digits are

used.

To clear entries from field,

press

*, *

See blank Programming Form

for examples of Account No.

entries.

If using the paging feature, do

not enter a leading 0 in the

subscriber account number,

and do not use digits A-F

anywhere in the number. Some

paging systems provide voice

mail capability, which is

activated by a leading 0 in the

message.

43 PRIMARY SUBS ACCOUNT. No. (partition 1) | | |

See box at left.

44 SECONDARY SUBS ACCOUNT. No. (partition 1) | | |

See box at left.

45 PRIMARY SUBS ACCOUNT. No. (partition 2) | | |

See box at left.

46 SECONDARY SUBS ACCOUNT. No. (part. 2) | | |

See box at left.

47 PHONE SYSTEM SELECT 1

If Central Station Receiver

is not

on WATS line:

0 = Pulse Dial

1 = Tone Dial

If Central Station Receiver

on WATS line:

2 = Pulse Dial

3 = Tone Dial

48 REPORT FORMAT 7 0

0 = 3+1; 4+1 ADEMCO Low Speed Standard Prim. Sec.

1 = 3+1; 4+1 Radionics Standard

2 = 4+2 ADEMCO Low Speed Standard

3 = 4+2 Radionics Standard

6 = 4+2 ADEMCO Express

7 = ADEMCO Contact ID Reporting

8 = 3+1; 4+1 ADEMCO Low Speed Expanded

9 = 3+1; 4+1 Radionics Expanded

Enter

as the 4th digit of

43 through

46, if 3+1 dialer reporting is to be

used.

For an explanation of these formats, see

the

SYSTEM

COMMUNICATION

section

Note: The maximum number of alarm and alarm restore reports during

one armed period is determined by field

93.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 99 100

Comentarios a estos manuales

Sin comentarios

Vista Ademco -10SE Guía para resolver problemas Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vista Ademco -10SE